Designed to perform, Whatever your goal.

PDC drill bits use Polycrystalline Diamond Compact (PDC) cutters that are embedded to either a steel or matrix body.  The PDC cutters are manufactured using synthetic diamonds that are bonded to a tungsten carbide substrate.

Recommended Use:

>Soft to medium-hard formations.  

>Directional Drilling 

>Coal Degasification

• Wide range of profiles, cutters, and sizes to. adapt to your drilling needs.  

• High Rate of Penetration 

• Custom sizes and configurations available.

• Diameter: 3.782”
• Type: Full Hole PDC Bit
• Junk Slots: 3
• Gauge: Heavy Gauge For Superior Sidetrack Ability
• Cutters: 13mm Diameter (9) / Half Exposed
• Price: TBD

• Diameter: 3.782”
• Type: Full Hole PDC Bit
• Junk Slots: 3
• Gauge: Standard Gauge For Normal Conditions
• Cutters: 13mm Diameter (9) / Flat Face
• Price: TBD

• Diameter: 3.782”
• Type: Navi Reamer
• Usage: For Use Behind Bit To Reduce Vibration
• On Bit And Extend Bit Life
• Price: TBD

> PDC / Diamond Impreg / Surface Set available.

> With or without back cutters.  

> Custom Sizes Available.

> Used in conjunction with a directional bit to reduce vibration and extend life.

> Maintains hole integrity. 

> With or without back cutters.  

> Custom Sizes Available.

Drilling Products Inc. stocks and supplies a complete range of full hole directional navi bits and reamers that are most used with DHM’s (down hole motors).   Engineered with proven technology and decades of experience, our bits were developed to ensure success for any of your directional needs. 

Contact DPI today to discuss your upcoming directional project.  

Diamond impregnated drill bits are manufactured with synthetic diamonds that are uniformly distributed and embedded within a powered matrix.  As you drill the matrix is worn causing new diamond layers to be exposed resulting in better overall bit life.

Recommended use:

> Hard to Very Hard

> Abrasive and Competent formations 

> Performs well in fractured or consolidated rock. 

> Granite, Basalt, Quartzite, Chert

Series 1-15 available (1 soft – 15 hard) 

Surface Set bits are manufactured with a single layer of synthetic diamonds embedded on the working surface of the bit.  

Recommended use:

> Medium to soft formation 

> Fractured formations 

> Sedimentary Formations 

Wide range of diamond sizes and crown profiles allows you to optimize the best bits for your project.

Reamer shells are engineered to maintain hole gauge, stabilize the drill string, and reduce tool wear in challenging drilling conditions. 

>Available in a range of sizes and configurations 

Casing and rod shoes are designed to advance casing through overburden, seat rods into bedrock, and protect drill strings in challenging formations. 

• Available in multiple sizes and cutting configurations

Mill bits are manufactured with an aggressive cutting structure made from premium cutting grade tungsten carbide.   Designed to mill/cut through metal obstructions left or lost downhole.  

Wide variety of profiles and sizes. 

Recommended Uses:

>Removing lost tooling, bridge plugs, packers, and other obstructions.

>Drilling through cement or other hard materials.

>Milling through damaged casing, liners, or tubing.

>Preparing wells for abandonment or completion. 

DPI has a rental fleet of mill bits to help you when you are in a bind.  Contact us today for more information.  

> Sealed Bearing 

> Open Bearing

> Various Cone Configurations 

> Mill Tooth Cutters

> TCI Cutters

Drilling Products Inc PDC Reamers are designed to provide aggressive cutting action, exceptional wear resistance, and consistent hole gauge performance in challenging drilling conditions.

Hole Openers and PDC Reamers are Designed to enlarge pilot holes efficiently and maintain wellbore stability, our hole openers deliver superior durability, cutting efficiency, and reliability across a wide range of formations.

Contact DPI for rental and Rebuild services

Custom sizes and configurations to match your drilling needs.